Catalytic Generation and Chemoselective Transfer of Nucleophilic Hydrides from Dihydrogen

Copper(I)–N-heterocyclic-carbene (NHC) complexes enabled the catalytic generation of nucleophilic hydrides from dihydrogen (H₂) and their subsequent transfer to allylic chlorides. The highly chemoselective catalyst displayed no concomitant hydrogenation reactivity; in fact, the terminal double bond formed in the hydride transfer remained intact. Switching to deuterium gas (D₂) allowed for regioselective monodeuteration with excellent isotope incorporation.     

Screening of Three Transition Metal‐Mediated Reactions Compatible with DNA‐Encoded Chemical Libraries

The construction of DNA‐encoded chemical libraries (DECLs) crucially relies on the availability of chemical reactions, which are DNA‐compatible and which exhibit high conversion rates for a large number of diverse substrates. In this work, we present our optimization and validation procedures for three copper and palladium‐catalyzed reactions (Suzuki cross‐coupling, Sonogashira cross‐coupling, and copper(I)‐catalyzed alkyne‐azide cycloaddition (CuAAC)), which have been successfully used by our group for the construction of large encoded libraries.     

Theoretical and experimental investigations of complexation with BF3.Et2O effects on electronic structures,energies and photophysical properties of Anil and tetraphenyl (hydroxyl) imidazol

The novel compounds (E)‐2‐(((4‐hydroxyphenyl)imino)methyl)phenol, Tetraphenyl (hydroxyl) imidazole and their corresponding Boron difluoride complexes were synthesized and characterized by spectroscopic techniques. Density functional theory calculations at B3LYP‐D3/6–311++G (d, p) level of theory were performed for the geometric parameters. The MEP surface studies were used to understand the behavior of molecules in terms of charge transfer and to determine how these molecules interact. We used the GIAO and the B3LYP‐D3 with a 6–311++ G (d, p) basis set to simulate the (¹H‐NMR and ¹⁹F‐NMR) and the IR spectra, respectively. The corresponding calculated results are in good agreement with the experimental data. The stability of the molecule arising from hyperconjugation interaction and charge delocalization were analyzed using NBO analysis. FMOs revealed the occurrence of charge transfer within the molecule. The complexation using BF₃.Et₂O was also found to have remarkable effects on the electrochemical properties of the studied molecules, where (b) and (d) present lower chemical stability, higher reactivity and higher polarizability than (a) and (c), respectively. Moreover, the energy gap of (a) and (c) decreased after complexation using BF₃.Et₂O, indicating the reliability of the electrochemical evaluation of LUMO and HOMO energy levels. These values are the factors explaining the possible charge transfer interaction within the molecule. The absorption and emission spectra of the model compound were also simulated and compared to experimental observations in the DMF solvent. The results of DFT calculations supported the structural and spectroscopic data and confirmed the structure modification of frontier molecular orbitals for BF₂ complexes as well as tunable potentials and energy levels.     

Origin of the Photoinduced Geometrical Change of Copper(I) Complexes from the Quantum Chemical Topology View

Copper(I) complexes (CICs) are of great interest due to their applications as redox mediators and molecular switches. CICs present drastic geometrical change in their excited states, which interferes with their luminescence properties. The photophysical process has been extensively studied by several time-resolved methods to gain an understanding of the dynamics and mechanism of the torsion, which has been explained in terms of a Jahn–Teller effect. Here, we propose an alternative explanation for the photoinduced structural change of CICs, based on electron density redistribution. After photoexcitation of a CIC (S₀→S₁), a metal-to-ligand charge transfer stabilizes the ligand and destabilizes the metal. A subsequent electron transfer, through an intersystem crossing process, followed by an internal conversion (S₁→T₂→T₁), intensifies the energetic differences between the metal and ligand within the complex. The energy profile of each state is the result of the balance between metal and ligand energy changes. The loss of electrons originates an increase in the attractive potential energy within the copper basin, which is not compensated by the associated reduction of the repulsive atomic potential. To counterbalance the atomic destabilization, the valence shell of the copper center is polarized (defined by ∇²ρ(r) and ∇²V_ne(r)) during the deactivation path. This polarization increases the magnitude of the intra-atomic nuclear–electron interactions within the copper atom and provokes the flattening of the structure to obtain the geometry with the maximum interaction between the charge depletions of the metal and the charge concentrations of the ligand.     

Heterogeneous copper‐catalyzed oxidative coupling of oxime acetates with sodium sulfinates: An efficient and practical synthesis of β‐keto sulfones

An efficient and practical route to β‐keto sulfones has been developed through heterogeneous oxidative coupling of oxime acetates with sodium sulfinates by using an MCM‐41‐supported Schiff base‐pyridine bidentate copper (II) complex [MCM‐41‐Sb,Py‐Cu (OAc)₂] as the catalyst and oxime acetates as an internal oxidant, followed by hydrolysis. The reaction generates a variety of β‐keto sulfones in good to excellent yields. This new heterogeneous copper (II) catalyst can be easily prepared via a simple procedure from readily available and inexpensive reagents and exhibits the same catalytic activity as Cu (OAc)₂. MCM‐41‐Sb,Py‐Cu (OAc)₂ is also easy to recover and is recyclable up to eight times with almost consistent activity.     

Copper-Catalyzed Trifunctionalization of Alkynes: Rapid Formation of Oxindoles Bearing Geminal Diboronates

A copper-catalyzed trifunctionalization of alkynes that provides rapid access to oxindoles bearing a geminal diboronate side chain, highlighted by the simultaneous formation of one C−C bond and two C−B bonds, is reported. This new reaction features simple reaction conditions (ligand-free catalysis), a general substrate scope, and excellent chemoselectivity. Mechanistic study revealed a reaction sequence constituted by, in the order, borylation, intramolecular cross-coupling, hydroboration, which has been rarely documented.     

1,10-Phenanthroline: A versatile ligand to promote copper-catalyzed cascade reactions

Ligand-promoted copper-catalyzed cascade reactions have become a robust tool for the synthesis of cyclic compounds. Although numerous ligands have been developed, this review focuses on the introduction of commercially available 1,10-phenanthroline-promoted copper-catalyzed cascade reactions in recent years. Moreover, based on original articles, this review highlights product yields in the presence and absence of the ligand, and the possible mechanistic role of the ‘copper/1,10-phenanthroline’ catalytic system.     

单颗金刚石切削无氧铜的声发射关联维特征*

声发射技术可以实现无氧铜切削加工特征的监测与评价。采用声发射技术监测单颗金刚石磨粒旋转切削无氧铜，利用G-P算法重构出声发射时域信号相空间，采用自相关函数法计算出相空间时间延迟参数，通过相空间双对数曲线的计算，得到不同切削工况下的关联维数。研究结果表明，进给速度和切削速度对声发射信号影响较不显著，切深与声发射信号振幅呈正效应关系；声发射信号双对数曲线呈现阶段性增加趋势，并逐渐收敛于饱和状态，关联维数随着嵌入维数的增加先快速下降后趋于平稳；金刚石切削无氧铜的声发射信号具有混沌运动变化特性，在较小嵌入维数时，关联维数与切深和切削速度呈现线性负效应关系，与进给速度呈现线性正效应关系。该研究为无氧铜的切削加工提供理论参考。     

Hydroxyl Radical Generation and DNA Nuclease Activity: A Mechanistic Study Based on a Surface‐Immobilized Copper Thioether Clip‐Phen Derivative

Coordination compounds of copper have been invoked as major actors in processes involving the reduction of molecular oxygen, mostly with the generation of radical species the assignment for which has, so far, not been fully addressed. In the present work, we have carried out studies in solution and on surfaces to gain insights into the nature of the radical oxygen species (ROS) generated by a copper(II) coordination compound containing a thioether clip‐phen derivative, 1,3‐bis(1,10‐phenanthrolin‐2‐yloxy)‐N‐(4‐(methylthio)benzylidene)propan‐2‐amine (2CP‐Bz‐SMe), enabling its adsorption/immobilization to gold surfaces. Whereas surface plasmon resonance (SPR) and electrochemistry of the adsorbed complex indicated the formation of a dimeric Cu^I intermediate containing molecular oxygen as a bridging ligand, scanning electrochemical microscopy (SECM) and nuclease assays pointed to the generation of a ROS species. Electron paramagnetic resonance (EPR) data reinforced such conclusions, indicating that radical production was dependent on the amount of oxygen and H₂O₂, thus pointing to a mechanism involving a Fenton‐like reaction that results in the production of OH^..     

Copper Causes Regiospecific Formation of C4F8‐Containing Six‐Membered Rings and their Defluorination/Aromatization to C4F4‐Containing Rings in Triphenylene/1,4‐C4F8I2 Reactions

The presence of Cu in reactions of triphenylene (TRPH) and 1,4‐C₄F₈I₂ at 360 °C led to regiospecific substitution of TRPH ortho C(β) atoms to form C₄F₈‐containing rings, completely suppressing substitution on C(α) atoms. In addition, Cu caused selective reductive‐defluorination/aromatization (RD/A) to form C₄F₄‐containing aromatic rings. Without Cu, the reactions of TRPH and 1,4‐C₄F₈I₂ were not regiospecific and no RD/A was observed. These results, supported by DFT calculations, are the first examples of Cu‐promoted 1) regiospecific perfluoroannulation, 2) preparative C?F activation, and 3) RD/A. HPLC‐purified products were characterized by X‐ray diffraction, low‐temperature PES, and ¹H/¹⁹F NMR.